Zetex’ product literature is always produced to the highest level of quality, and is subject to rigorous checking prior to publishing. However errors in information occur occasionally. We correct these errors when re-printing literature but, due to timescales between print runs, these errors may not be corrected for several months.
To ensure that the latest correct information is always available, the following is an errata table listing known technical errors in current Zetex literature. Please refer to this when using the referred piece of literature.
| Literature errata table |
| Date
| Title |
Page(s) |
Details |
| June 2006 |
Discrete and standard IC product guides -
Power Management ICs |
8 |
Pinout connections diagram for SOT23
Connections should be inverted so that ‘IN’ connection is top right and ‘OUT’ connection is bottom right |
| June 2006 |
Discrete and standard IC product guides -
Power Management ICs |
22 |
Pinout connections diagram for SOT23
Pinout information missing:
Pin 1 - Ni1000
Pin 2 - Ni1000
Pin 3 - need a good thermal contact for a short response time |
| June 2006 |
Discrete and standard IC product guides - Discrete Semiconductors |
9 |
ZTX549A
Column 5 - VCE(sat) Max. mV. Value should be -300mV |
| June 2006 |
Discrete and standard IC product guides - Discrete Semiconductors |
24 |
ZXTS1000E6
SOT23-6 pinout information should refer to option (D) of the pinout diagrams |
| June 2006 |
Discrete and standard IC product guides - Discrete Semiconductors |
27 |
12 volt hyperabrupt varactor diodes table
Column 5 heading - Capacitance C0.5/C2.5, f=1MHz. Should read ‘min.’ |
| June 2006 |
Discrete and standard IC product guides - Discrete Semiconductors |
- | Advanced products table
Column 5 heading - Capacitance C0.5/C2.5, f=1MHz. Should read ‘min.’ |
| June 2006 |
Discrete and standard IC product guides - Discrete Semiconductors |
48 |
E-Line thermal data
Horizontal title for derating curves graph should be Tamb - Ambient Temperature (ºC) |
